Vacuum Tray Dryer

We manufacture Different sizes of Tray driers, Dryers are used to remove liquids or moisture from bulk solids, powders, parts, continuous sheets or other liquids by evaporation or sublimation.
Dryers can be broken up into two main types:
Direct dryers convectively heat a product through direct contact with heated air, gas or a combusted gas product.
Indirect dryers conductively heat a product through contact with a heated wall.
Tray Dryer is used for the best drying results in the conventional processes. It is a double-walled cabinet with Single or Two doors. The gap between the two walls is filled with high-density fiber glass wool insulation material to avoid heat transfer. Stainless steel trays are placed on the movable trolleys. Tray Dryer is provided with control panel board, process timer etc.
Capacities and specifications:
Our tray Dryer is available in capacities ranging from 6, 12, 24, 48, 96, 192 trays.

• Main Body/Vacuum chamber SS316 with heavy-duty SS316 flange and Stiffeners.
• Door SS 316 (hemisphere shape) with heavy-duty SS316 flange.
• Shelves Hollow Type pads SS316 with flow Baffles.
• Condenser (Shell&tube) and Receiver in SS 304 with Isolation valve and Flow Glass in between to monitor condensation.
• Trays (without back folding) in SS316 rounded corners and edges.
• Explosion Vent/Rupture Disc on the vacuum chamber.
• Digital Temperature Controller (FLP) with solenoid controlled Pneumatic operated valve at Hot Water inlet.
• Provision for Validation Port on Body
• Digital Temp., Indicator (FLP) at H.W. inlet & outlet.
• Dial type Vacuum gauge and Digital Temp., Indicator (FLP) in Vapor line.
• Pressure release valve in Steam line.
• View Glass/Light glass provided on vacuum chamber Door, Body and Receiver.
• Silicon transparent gasket for the door.
• Nitrogen purging valve provided on Vacuum chamber.
• Vacuum brake valve provided on a vacuum chamber
• Drain valve for Vacuum chamber and Receiver.